Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-192reset maintenance
8
reset maintenance
This command resets technician-specified EPN maintenance circuit packs.
Specifying cabinets 2 or 3 resets EPN maintenance circuit packs in carrier “a” of
the specified cabinet.
This command also drops a SAT terminal session on the reset EPN maintenance
circuit pack. If this command runs from a EPN maintenance SAT terminal, reset
results do not display.
Output
The following output example is a display of the reset maintenance 02a
command.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
reset
maintenance
location
Physical location of the
EPN maintenance circuit
pack (carrier number).
Examples:
reset maintenance 02
reset maintenance 2
reset maintenance 3a
init
inads
craft
none SAT is dropped before
reset results can
display, when
command runs from
EPNSAT. Examine
error and alarm logs
for “MAINT” entries to
determine reset
success.
Port
Port address (cabinet-carrier-slot) of the reset MO.
Maintenance Name
MAINT
Alt. Name
Not applicable. ( )
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Test No.
306.
Error Code
System-generated description of a command failure.
reset maintenance 02A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02A MAINT 306 PASS
Command successfully completed