Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-179release packet-control
8
Output
The following example shows the output from the release modem-pool 1
command.
Field descriptions
release packet-control
This command activates the packet-control circuit pack, and reestablishes each
terminated point-to-point signaling link on this packet-control. This command is
the complement to the busyout packet-control command. (deactivates packet
control and destroys terminated point-to-point signaling links).
Port
Port address (cabinet-carrier-slot-circuit) of busied out
maintenance object.
Maintenance Name
MODEM-PT.
Alt. Name
This field is not applicable to this command.
Result
Success status of a busied out object (PASS, ABORT, FAIL)
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
release
packet-control
location
simplex = location
parameter not used.
Duplicated = packet
control carrier (1A or 1B)
Examples:
release packet-control 1A
release packet-control 1B
init
inads
craft
simplex = cabinet 1,
carrier A.
duplex = cabinet 1.
(no default carriers.)
see below
release modem-pool 1 SPE B
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0701 MODEM-PT PASS
01C0703 MODEM-PT PASS
Command successfully completed