Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-120test inads-link
A
test inads-link
Help Messages
If the system technician presses HELP after entering "test inads-link" the following
message will be displayed:
[‘1’ or ‘2’]
Or press CANCEL to cancel the command
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
test interface
Help Messages
If the system technician presses HELP after entering "test interface" the following
message will be displayed:
Enter [cabinet(1)];carrier(A-B), pos(1-2),
[’long’ or ’short’], [’repeat’ (1-100)
or ’clear’], [’schedule’]
Error Messages
If the specified carrier is not the active PE, the following message will be displayed:
Command must be executed from active SPE
Failures? "x" is an invalid entry, please press HELP
All-ports? "x" is an invalid entry, please press HELP
SPE-interchange? "x" is an invalid entry, please press HELP