Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-844MODEM-PT (Modem Pool Port)
10
Table 10-281. TEST #99 Modem Pool Audit Test
Error
Code
Test
Result Description/ Recommendation
NONE ABORT The system was not able to allocate all the necessary resources to execute
this test. An ABORT simply indicates that the conversion resource was in
use when the audit was performed. No repair action is necessary unless it
was known that the conversion resource was actually idle during the test
(yellow in-use LED was off) or was busied out before the test was run. If
this is the case, a TN758 failure condition may exist and the following
procedure should be used:
1. Busyout both of the TN758 Pooled Modem conversion resources on
the circuit pack containing the failing conversion resource.
2. If the test continues to abort, replace the Pooled Modem circuit pack
and retest.
3. If the circuit pack fails after replacement, escalate the problem.
Continued on next page