Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-251status conference
8
In Use Is the endpoint participating in the conference or connecting to the
conference? - y, c, e, f, n, blank.
“y” = The endpoint is in use and fully-connected on all media in an
active conference.
“c” = The endpoint is in use and fully-connected; however, the
endpoint changes the conference audio or video capability, or the rate
of the conference due to rate adaptation. This condition requires
analysis of this endpoint’s capabilities and mode fields to identify the
reduced capability.
“e” = The endpoint active, but has capability problems. The endpoint
lacks one of the required capabilities (Vid, Bhl, MLP) to be a full
participant. For MLP capabilities, see the “T120” field. This condition
requires analysis of this endpoint’s capabilities and mode field to
identify the missing capability.
“f” = The endpoint is active, but is not connected to all media. The
endpoint declared all required capabilities (channel/video/
audio/data) but is not fully-connected to all conference media. This
endpoint may be connecting, failed to connect, or is not a valid video
source. This condition requires analysis of this endpoint’s capabilities
and mode fields to identify the problem.
“n” = The endpoint connects then disconnects in a conference, or
unsuccessfully attempts to connect to a conference.
“blank” = Blank until the first call is made from or to the endpoint.
Enh BAS Enhanced Basic Service Flag - n, y
“y” = The endpoint supports the enhanced BAS commands/caps;
“n” = The endpoint supports the basic BAS commands/caps.
Chl Data on the quantify and quality of channels (transfer rate)? - y, e, n,
blank
“y” = The endpoint has the required number of channels.
“e” = The endpoint does not declare support for the correct number of
channels and cannot participate fully in the conference.
“n” = The endpoint declares the correct number of channels, but not
all channels join the conference, due to network or endpoint problems.
“blank” = Audio add-on endpoints set the Chl field to blank.