Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-1550WAE-PORT (Wideband Access Endpoint Port)
10
Port Audit and Update Test (#36)
This test sends port level translation data from switch processor to the UDS1
Interface circuit pack to ensure that the wideband access endpoint port’s
translation is correct.
Table 10-524. TEST #36 Audit and Update Test
Error
Code
Test
Result Description/ Recommendation
ABORT Internal System Error.
1. Retry the command at one minute intervals a maximum of five times.
2. If the test continues to abort, escalate the problem.
1006 ABORT The port is out-of-service. If the port is busied out:
1. Issue release access-endpoint <extension> command to put the
port back into in-service.
2. Retry the test command.
If the port is not busied out:
1. Check the error and alarm logs for WAE-PORT and UDS1-BD errors
and alarms. Follow the recommended repair procedures.
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at one minute intervals a maximum of five times.
2. If the test continues to abort, escalate the problem.
FAIL Internal system error.
1. Retry the command at one minute intervals a maximum of five times.
2. If the test continues to fail, escalate the problem.
PASS Port translation has been updated successfully.
Continued on next page