Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-202set expansion-link
8
Output
The following output example is a display of the save translation command on a
duplex system.
Field descriptions
.
set expansion-link
The set expansion-link command sets the Expansion-Interface Link between:
■ the PPN and an EPN
■ two EPNs to a specific Interface Link circuit pack between PPN and EPN.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
save
translations
spe-active
spe
standby
identifies that save
translations should occur on
the active processor’s MSS
device.
identifies that save
translations should occur on
the standby processor’s MSS
device.
Examples:
save translation
save translation spe-active
save translation
spe-standby
init
inads
craft
cust
Simplex
= SPE A;
Duplex
= SPE A
& SPE B
Command
cannot be
performed if
data is being
changed by
an
administrative
command.
Processor
Identifies the processor carrier where translation data
saves. (SPE-A, or SPE-B.)
Command Completion Status
Displays a variety of messages, identifying the success
or failure of the command.
save translation
SAVE TRANSLATION
Processor Command Completion Status Error Code
SPE-A Success 0
SPE-B Success 0
Command Successfully Completed