Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-72resume hardware-group
A
Required announcement data module not administered
If the announcement data module is not administered or is currently in use, the following
message is displayed:
Required data module not administered or unavailable
If there is no announcement board in the system, the following message is displayed:
Integrated announcement board not present
If the NETCON data module is not administered or out of service the following message
is displayed:
Required NETCON data module not
administered or out-of-service
If the NETCON data module is busy the following message is displayed:
Required NETCON data module unavailable
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
resume hardware-group
Help Messages
If the system technician presses HELP after entering "resume hardware-group," the
following message will be displayed:
Entry is not required
Error Messages
If there is no "test hardware-group" command to be resumed, i.e, no "test
hardware-group" command was previously canceled, or some system recovery had
occurred and no "test hardware-group" command had since been entered and
subsequently canceled, then the following message will be displayed:
Command aborted - no hardware-group
test available to resume
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict