Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-113list mst
8
Field descriptions (list measurements ds1 log)
list mst
This command displays the messages in the trace buffer and can be used when
the trace is disabled or active, but if active, older messages may be sporadically
omitted if wraparound is selected and the message rate is high. The command
can be used repeatedly without destroying the integrity of the buffer.
Counted
Since:
The start time and date when the associated measurement counters
were cleared or the DS1 circuit pack was administered.
DATE
The date of the 15-minute interval.
TIME
The time of the 15-minute interval.
ERRORED
SECONDS
The value of the errored seconds counter for the specified 15-minute
interval (0 - 900 or N/A if data for the 15-minute interval is invalid).
BURSTY ERR
SECS
The value of the bursty errored seconds counter for the specified
15-minute interval (0 - 900 or N/A if data for the 15-minute interval is
invalid).
SEVERELY ERR
SECS
The value of the severely errored seconds counter for the specified
15-minute interval (0 - 900 or N/A if data for the 15-minute interval is
invalid).
FAILED
SECONDS
The value of the failed seconds counter for the specified 15-minute
interval (0 - 900 or N/A if data for the 15-minute interval is invalid).
VALID
INTERVAL
This field indicates whether the data for the specified 15-minute interval
is valid. Data is considered valid when a count for that 15-minute
interval. If the field has a value of y, the data for the four error
categories is valid; otherwise, the data is invalid.
Data is considered valid when a count for that 15-minute interval is
retrieved and none of the following invalid conditions occur:
— If a system warm start or a system cold start occurred during the
interval
— If the DS1 circuit pack was not inserted during the interval
— If the system time was changed during the interval
— If the system was too busy to respond to a poll request for the
interval.