Lucent Technologies lucent Server User Manual


  Open as PDF
of 2392
 
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Management Terminals
Page 3-26System Logoff Procedure
3
NOTE:
Tab characters are not allowed. The existing command line interface will
cause the cursor to move to the next field if a Tab character is entered.
If a user changes any lines that cause two or more consecutive blank lines, then
the bulletin board will be automatically reorganized (upon submittal). Two or
more blank lines will be consolidated into a single blank line. If a blank line is at
the top of a form, it will also be deleted. This function will help prevent holes in the
bulletin board screens as old entries are deleted.
To save a message entered into the bulletin board text field, the user must
execute the save translation command.
G3V3 software is required for the bulletin board feature. The bulletin board
feature, as described in this document is available in G3V4. The G3V3/G3V4
feature on the systems-parameters customers-options form need not be
enabled.
The following screen is an example of bulletin board messages between Lucent
Technologies and a customer who is having trouble with trunk group translations:
System Logoff Procedure
The system logoff procedure should be done any time the terminal is not being
used. This assures that system translations are not accidentally corrupted. The
monitor system command, when canceled, automatically causes a terminal
user to be logged off and, thus, prevents unauthorized use of the terminal. Use
the following procedure to log off the system:
1. Verify that the screen displays: enter command:
2. Enter logoff and press
Enter. The screen displays:
login:
display bulletin-board Page 1 of 3
Messages (* indicates high-priority) Date
* AT&T is in the process of 02/02/95
* investigating your trunk lockup problem. 02/02/95
* The Bulletin Board will be updated as 02/02/95
* information is found. 02/02/95
* We have identified the problem. 02/02/95
* The trunk you added does not provide 02/02/95
* disconnect supervision, however your trunk 02/02/95
* group was administered as such. 02/02/95
* Please call for details. 02/02/95
*
We recently added a new trunk group (14) 02/03/95
and have had trunk group members locking up. 02/03/95
We see the error - Thanks for checking. 02/03/95