Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-244status conference
8
Rate Adpt Rate adaptation/Interworking indicator (5, 6, y, c, e, n, blank). 5 and
“6” apply to Low Speed/High Speed Interworking. All other values
apply to Rate Adaptation.
“5” = 56-kbps (Low Speed) endpoint joins a High Speed (128 kbps or
above) conference. This endpoint connects with audio only capability
but is not a valid video source and destination.
“6” = 64-kbps (Low Speed) endpoint joins a High Speed (128 kbps or
above) conference. This endpoint connects with audio only capability
but is not a valid video source and destination.
“y” = Endpoint joins the conference at 64 kbps, but because rate
adaptation to 56 kbps is triggered by another endpoint, this endpoint
rate adapts to 56 kbps.
“c “ = The administered conference bandwidth is 64 kbps. This
endpoint joins the conference at 56 kbps. The first 56 kbps endpoint
that joins 64 kbps rate adaptable conferences triggers rate adaptation
(see Join Time below).
“n” = Another endpoint triggers a 64-kbps conference to rate adapt to
56 kbps. This endpoint joins the conference at 64 kbps, but
encounters problems in rate adapting to 56 kbps. This endpoint may
have audio and may be receiving video, but is not a valid video
source.
“blank” Rate adaptation was not triggered by any endpoint. If this
endpoint is in use and connected, it joins the conference at the
administered bandwidth.
Bond Mode BONDing Mode = blank for calls that are unrelated to bonding.
Ts “t” = The endpoint detects voice energy (talking).
“m” = The endpoint indicates to the MCU that it is muted. It is possible
for an endpoint to mute, but not send any indication to the MCU. In
this situation the MCU does not display a mute indication.
“M” = UDD/CRCS Agent interface mutes the endpoint’s audio. Both
the endpoint and the UCC/CRCS Agent must mute the endpoint
audio.
“S” = The solo-audio state set by UCC/CRCS Agents mutes the
endpoint’s audio. While in solo-audio state, new endpoints that join
the conference automatically mute.
“blank” = Voice energy (talking) is not detected from the endpoint.