Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-77set options
A
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message is displayed:
All maintenance resources busy; try again later
Field Help
Since all fields on the first page may have the same values, then pressing HELP in any
field on the first page presents the following field help message:
m(inor) n(o) r(eport) w(arning) y(es)
The following is a description of the values:
All fields on page 2 may have the same values. Pressing
HELP in any field on page 2
gives the following field help message:
Enter alarm group number: 1 to 4
The alarm group number is a way of distinguishing four different groups of alarms. These
alarm groups allow the user to specify that alarms in different groups are handled
differently from those in other groups.
Field Error Messages
All of the fields on the first page allow the same values. Only one error message is
printed for all first page fields. If the value is not one of the listed characters (m,n,r,w,or y)
then the following message is displayed:
"X" is an invalid entry; please press
HELP key
All of the fields on page 2 allow the same values. If the value in one of these fields is not
numeric, the following message is displayed:
Entry must be all digits
All of the fields on pages page 2 allow the same values. If the value in one of these fields
is a digit other than 1, 2, 3, or 4, the following message is displayed:
Entry out of range
m(inor) Downgrade the major alarm to a minor alarm and report the alarm to
INADS.
n(o) Do not log the alarm or report it to INADS.
r(eport) Downgrade the alarm to a warning and report the warning to INADS.
w(arning) Downgrade the alarm to a warning, log it but do not report the alarm to
INADS.
y(es) Log and report the alarm to INADS.