Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-1559XXX-BD (Common Port Circuit Pack)
10
Ringing Application Test (#51)
This test checks the ringing application circuitry common to all ports on an
Analog Line circuit pack.
EXTRA BD Certain circuit packs have limitations on how many circuit packs
can be in the system or port network such as the Maintenance/Test
circuit pack (TN771B or TN771C), the Tone Detector circuit pack
(TN748B, TN748C or TN748D) and the Call Classifier (TN744). The
Maintenance/Test circuit pack allows only one circuit pack per port
network. The Tone Detector and Call Classifier allow only 10 circuit
packs in each system. All additional circuit packs return EXTRA-BD
and should be removed.
any NO BOARD This is normal if the test is being done when (a) the circuit pack is
not physically in the system or (b) the system is booting up.
Otherwise, there is some inconsistency between the physical
configuration and the data kept in the system.
1. Verify that the circuit pack is physically in the system.
2. Verify that the system is not in a stage of booting up.
3. Retry the command at one-minute intervals for a maximum of
five times.
4. If the test continues to return NO BOARD, escalate the
problem.
Table 10-527. TEST #51 Ringing Application Circuit Test
Error
Code
Test
Result Description/ Recommendation
1000 or
2100
ABORT Could not allocate the necessary system resources to run test.
ABORT Could not allocate the necessary system resources to run test. The circuit
pack is not installed. Internal System Error.
Continued on next page
Table 10-526. TEST #50 NPE Audit Test — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page