Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-103list config software-version
8
Some things to note when using the list configuration software-version
command are:
1. For simplex systems, the fields under column “SPE_B are always blank
and the optional Long qualifier is not part of the command line.
2. For a High or Critical Reliability System, the fields under the column of the
standby SPE are blank if the optional long modifier is not given.
3. If the tape or memory card contains a core dump file system, fields for the
tape or memory card will contain
coredump
. This is because in a
coredump file system all files other than the
coredump
file are marked as
invalid.
4. If for any reason, MSS cannot be read when the command is issued, the
string no tape or none for no memory card will be placed in the
appropriate fields on the screen. This does not mean that the system
thinks there is no tape, only that the software was unable to read the
appropriate information when requested.
5. If the command is issued using the
memory-resident
option, the fields on
the form associated with the tape will contain the string n/a.
6. When the status of the update field is displayed, the following strings will
be used (for more information refer to step c of this list):
a. none in memory — no update has been applied to memory.
b. immediate partially applied — an error condition that is
valid only when an update that is in the process of being applied
fails. Check the validity of the update file that was sent, and then
check the hardware error log for tape errors, and follow standard
maintenance procedures.
c. all immediate applied deferred pending — a valid
update file was received by the switch, and all the immediate
sub-patches were applied. This state indicates that there are
deferred sub-patches in the update file, and a system reset of the
proper level has not occurred since the update file was received.
Mem Card Resident
The last date and time that announcement data was saved to the
memory card. If the memory card is not installed, this field
displays no card.
PKT-CTRL FW
Version Section
displays information related to the Packet Control firmware.
Information is displayed for the Packet Control circuit pack
resident copy as well as the corresponding tape file
Pkt-ctrl Resident
The version of firmware in the Packet Control circuit pack.
Flash Resident
The version of the Packet Control circuit pack residing on the
system flash memory.