Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-346test hardware-group
8
The following example show the output for the test environment 2 command,
where cabinet 2 is an SCC cabinet.
test hardware-group
This command allows a user to perform a set of hardware diagnostic tests on the
whole system, a carrier, cabinet, spe, or board. The tests vary according to the
configuration of the system and the specified command options.
This command runs a series of tests on all the hardware on the entire system, an
individual carrier, cabinet, spe, or board. The tests vary depending on options
chosen and board types. Each test exercises diagnostics on all the hardware in
the specified hardware group and reports results of the test along with any
possible error codes. Concurrent testing is done to enhance performance,
therefore, test results display on the SAT in the order they are received.
Consequently, test results of one maintenance object may be intermixed with test
results of other maintenance objects.
Because the tests for this command are not destructive, the tests performed on a
particular maintenance object with either the
short
or the long
option
may not be
the same as the corresponding demand tests.
A hardware-group command executing in the foreground
may be cancelled by
either pressing the
CANCEL key or by entering the cancel hardware-group
command at a different SAT. However, if the technician wants to cancel a test
hardware-group command running in the background
, the cancel
hardware-group command can be entered on any SAT. A canceled test
hardware-group command can be resumed at the point it left off by entering the
resume hardware-group command. Restarts are not allowed for test
hardware-group commands entered with either the
all-ports
option or the
spe-interchange
option.
test environment 2
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
02 DC-POWER 5 PASS
02 EMG-XFER 124 PASS
02 EXT-DEV 120 PASS
02 RING-GEN 117 PASS
02 RING-GEN 118 PASS
Command Successfully Completed