Lucent Technologies lucent Server User Manual


  Open as PDF
of 2392
 
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-220CABINET (Cabinet Sensors)
10
1FAIL
(cont’d.)
4. If the fans are not at high speed, measure the cabinet temperature at
the air intake and the air exhaust at the top of the cabinet.
a. If the 15
0
C/50
0
C criteria is met, there is a problem with either the
AHD1 circuit pack or the fans that is preventing the fans from
operating at high speed. Replace the AHD1 circuit pack and/or the
fans. If this succeeds in getting the fans to run at high speed, wait
five minutes to give the cabinet time to cool down and, rerun the
test. If the problem persists, go to step 5.
b. If the 15
0
C/50
0
C criteria is not met, the PR-MAINT
(Maintenance/Tape Processor), DUPINT (Duplication Interface)
circuit pack, or the EPN MAINT (Maintenance) circuit pack is
incorrectly reporting this condition. Look for and resolve all errors
on these maintenance objects first, then rerun the test. If the test
still fails, escalate the problem.
5. If the fans are running at the high speed, check the items on list that
follows. Any on of the items could be restricting or redirecting the flow
of air within the cabinet.
a. Check both filters. If a filter is dirty or clogged it should be cleaned
or replaced. The filters can either be washed with soap and water
or vacuumed.
b. Make sure there is nothing (other than circuit packs) in the carrier
slots that could be restricting the air flow.
c. Make sure there are no missing (blank) circuit pack or carrier
faceplates. Install and/or replace them as necessary.
d. Make sure the cabinet door is properly closed. The door must be
closed for the fans to be able to properly cool the cabinet. Wait five
minutes to give the fans a chance to cool the cabinet. Rerun the
test. If the tests still fails, proceed to Step 6.
Table 10-76. TEST #122 Cabinet Temperature Query Test
[Non-Variable Speed Fans] — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page