Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-150mark port
8
The following example is the output from the list testcalls summary grp 80
command.
Summary report field descriptions
mark port
The mark port command marks faulty ports as defective to prevent their use in
other administrative operations (for example, adding a data-module or station).
Ports on any type of circuit pack may be marked except for installed circuit
packs that are administered automatically (for example, Tone Detector, Tone
Generator, Announcement, Speech Synthesizer, Call Classifier and
Trk Grp Num
The trunk group number which is being summarized. Only outgoing or
two-way analog trunks will be listed.
Num Of Trks
The total number of members per trunk group.
Last Test Date
The date of the oldest measurement in the trunk group.
Last Test Time
The time of the oldest measurement in the trunk group.
Trunks Passed
Transm Test
The number of trunks that have passed the trunk transmission tests.
Trunks Failed
Marginal Threshld
The number of trunks that failed a marginal threshold, but not an
unacceptable threshold according to the threshold values defined on
the trunk group form.
Trunks Failed
Unaccept Threshld
This is taken from the unacceptable threshold administered on the
Trunk group form.
Trks In-Use
The number of trunks that were in-use at the time of testing.
Trks Not Test
The number of trunks that were not tested due to error conditions.
Busied Out Trunks
The number of trunks that were busied out at the time. This could be
due to hardware problems, incorrect threshold values, etc.
list testcalls summary grp 80 SPE A
ATMS MEASUREMENT SUMMARY REPORT
Trunks Trunks Trunks
Trk Num Last Last Passed Failed Failed Trks Trks Busied
Grp Of Test Test Transm Marginal Unaccept In- Not Out
Num Trks Date Time Test Threshld Threshld Use Test Trunks
80 19 0 0 0 0 19 19
Command successfully completed