Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-190reset board
8
reset board
This command performs a soft reset of every specified, administered port on the
port circuit pack. Ports must be busied out before the port circuit pack resets.
!
WARNING:
This command is service disrupting and may cause extraneous alarms.
Output
The following output example is a display of the reset board 1c07 command and
assumes that the board in port network 1, carrier c, slot 7 is an analog board with
three ports administered.
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
reset board
location
repeat
number
Physical location: PCsspp
Number of times each board
reset repeats (1– 00)
Examples:
reset board 01c11
reset board c08
reset board 03d12 r 3
init
inads
craft
nms
carrier = 1
repeat
number = 1
none
Port
Port address (cabinet-carrier-slot) of the reset maintenance object.
Maintenance Name
Type of reset maintenance object.
reset board 1C07
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01C07 ANL-BD 53 PASS
Command Successfully Completed