Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-355test isdn-testcall
8
Output
The following example shows the output for the test interface a1 command. The
responses display on a test-by-test basis with one line of data for each test result.
Field descriptions
test isdn-testcall
This command starts an outgoing, asynchronous ISDN-PRI test call in the
asynchronous method from a specified trunk. If the test results are PASS, the test
call is started. A test result of ABORT means that a resource wasn’t available, for
example, B-channel or a Maintenance/Test circuit pack. A test result of FAIL
denotes that the outgoing ISDN-PRI test call was not established.
Port Port address: cabinet-carrier-slot (the carrier associated with the
particular processor interface board)
Maintenance
Name
The name of maintenance object
Alt. Name Not applicable.
Test No The test being executed
Result Test result: Pass, Abort, Fail, No Board, Disabled, or Extra Bd.
Error Code Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
test interface a1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
01A1 PI-SCI 231 PASS
01A1 PI-BD 52 PASS
Command Successfully Completed