Lucent Technologies lucent Server User Manual


  Open as PDF
of 2392
 
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-149list testcalls
8
Test Date
The month and day this trunk was tested.
Test Time
The time of day this trunk was tested.
Tst Rslt
This field describes the results of the trunk transmission test.
1004Hz-loss Min
Far-to-near and near-to-far measurements of 1004-Hz loss from
low-level tone.
1004Hz-loss Max
Far-to-near and near-to-far measurements of 1004-Hz loss at 0
dBm.
Loss dev at 404Hz
Transmission tests at low frequency. These tests measure a
maximum positive and negative deviation of +9 and -9 dB from
the 1004-Hz loss measurements.
Loss dev at 2804Hz
Transmission tests at high frequency. These tests measure a
maximum positive and negative deviation of +9 and -9 dB from
the 1004-Hz loss measurements.
C-msg Noise
Maximum noise interference (in dBrnC: decibels above reference
noise, which is B(EQ)10 sup -12E(EQ) watts) terminating on a
voice terminal within the voice-band frequency range (500 to
2500 Hz) between 15 and 55 dBrnC.
C-ntch Noise
Maximum signal-dependent noise interference on a line between
34 and 74 dBrnC.
SRL-LO
Singing return loss from 0 to 40 dB between the sum of the circuit
(repeater) gains and the sum of the circuit losses. SRL-LO occurs
most often in the frequency range of 200 to 500 Hz.
SRL-HI
Singing return loss from 0 to 40 dB between the sum of the circuit
(repeater) gains on a circuit and the sum of the circuit losses.
SRL-HI occurs most often in the frequency range of 2500 to 3200
Hz.
ERL
Echo return loss from 0 to 40 dB between the level of signal
strength transmitted and the level of signal strength reflected.
ERL occurs most often in the frequency range of 500 to 2500 Hz.