Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-21clear mst
A
If all of the available maintenance resources are currently in use, then the following
message is displayed:
All maintenance resources busy; try again later
clear mst
Help Messages
If HELP is pressed after entering "clear mst," the following message is displayed:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command, then a
message is displayed showing the login id of the conflicting user and the conflicting
command. A conflict could occur if another user was executing an enable, disable or
clear message sequence trace command at the same time. The message is as follows:
’login id’:’command’ has a command conflict
clear pkt
Help Messages
If the technician presses HELP after entering "clear pkt," this message displays:
Enter port-network; port network number (1-3)
Error Messages
If the packet bus is not administered, this message displays:
Packet Bus is not activated, check system-parameters maintenance form
If all available maintenance resources are in use, this message displays:
All maintenance resources busy; try again later