Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-212set tone-clock
8
set tone-clock
This command sets the active tone/clock for a PN that has a duplicated
tone/clock circuit pack. Technicians should reset the default active tone clock in
each PN after using the set tone-clock command. If it is not in use, a single
failure can cause an unnecessary service outage. The schedule maintenance
tone-clock switch option does not reset the tone-clock to the default active if it
was not active at the beginning of the test.
set vector
This command specifies restart levels for core dumps. This command places
core dumps on primary Mass Storage System (a tape in a tape system and core
dump memory cards in a memory card system) devices for later examination.
The set vector command allows technicians to tailor restart levels that copy
memory to primary Mass Storage System devices.
NOTE:
Software never requests an extended reboot.
To force an immediate core dump, in a simplex or duplex system, technicians
should set the appropriate bit using this command, then enter the reset system
command at a level that forces core dumps corresponding to set vector bits.
When a system restart occurs in a simplex Switch Processing Element (SPE)
system with the corresponding vector bit set, the core dump writes to secondary
storage (the primary MSS device). Once core dumps write, the vector clears and
the restart executes. This command disrupts service in a simplex system.
The active SPE executes a core dump when:
Hour:
0-23.
Minute:
0-59
Second:
The system sets this field to zero when the time of day clock is set.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
set tone-clock
location
override
Physical location (PC) of the
tone/clock to be tested
Forces the set command into
effect regardless of the tone/clock
circuit pack’s health.
Examples:
set tone-clock 01b
set tone-clock 1b
set tone-clock 01b override
set tone-clock a
init
inads
craft
1 (one) none