Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-65display initcauses
8
The following example shows a typical vector event report.
display initcauses
The display initcauses command displays a history of recovery steps taken by
the system.
This command displays information for restarts of the active
processor only
. Each time the system performs some type of recovery (due to
user request or a hardware or software problem), the recovery information is
stored. The software error log also contains information pertaining to restarts. If a
reset 4 (reboot) occurs, the software error log are also stored on tape.
Information in the software error log should be used in conjunction with
information in the initcauses log.
The history of the last 16 restarts performed by the system are recorded to the
initcauses buffer in chronological order. This buffer fills an entire screen with
information if it is completely full. Power failures in the processor complex wipe
out the entire initcauses buffer which is stored by the software. In duplex
systems, both processors have to lose power before the information is lost.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
initcauses
print
schedule
Report sent to printer
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
1
Examples:
display initcauses
display initcauses print
display initcauses schedule
init
inads
craft
nms
none none
display events Page 1 SPE B
EVENTS REPORT
Event Event Event Event First Last Evnt
Type Description Data 1 Data 2 Occur Occur Cnt
50020 Call not queued 256/5 B 09/28/13:43 09/28/13:43 1
50541 Not a messaging split Split 89 4C 09/28/13:43 09/28/13:43 1