Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-74save translation
A
If the announcement data module is not administered or is currently in use, the following
message is displayed:
Required data module not administered or unavailable
If there is no announcement board in the system, the following message is displayed:
Integrated announcement board not present
If the standby processor times out, the following message is displayed:
Command timed out on standby processor
If an inconsistency between the NETCON data module and the announcement data
module exists (e.g. both data modules using the same COR) the following message is
displayed:
System error, please try later
If the NETCON data module is not administered or out of service the following message
is displayed:
Required NETCON data module not
administered or out-of-service
If the NETCON data module is busy the following message is displayed:
Required NETCON data module unavailable
If the time of day is not set, the following message is displayed:
Please set the time of day before proceeding
If the standby SPE is inaccessible, the following message is displayed:
Cannot access the standby SPE at this time
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
save translation
Help Messages
If the system technician presses HELP after entering "save translation" the following
message will be displayed:
Enter [’spe-active’ or ’spe-standby’]