Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-16cancel hardware-group
A
cancel hardware-group
Help Messages
If the system technician presses help after entering "cancel hardware-group" the
following message will be displayed:
Entry is not required
Error Messages
If there is no "test hardware-group" command currently active to be canceled, the
following message will be displayed:
Command aborted - no hardware-group test in progress
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
change circuit-packs
Help Messages
If the system technician presses HELP after entering "change circuit-packs" the following
message is displayed:
Enter number between [1-3]
Error Messages
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If an invalid cabinet number is entered on the command line the following message will
be displayed:
"n" Identifier not assigned