Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-48display alarms
8
The figure below is an example of an Alarm Report.
Field descriptions
Port Lists the location codes for the alarmed object, as follows:
■ Circuit packs locations display as:
cabinet-carrier-[slot]-[circuit]. Example: 01C0702.
■ Port network locations display as: port network number-bus.
Example: PN 02B. PN 02 = Port Network (PN) number and A
or B = bus.
■ Fiber link locations display as: fiber link number-PNC side.
Example: x A-PNC. “X” = fiber link number and “A” = PNC
side [A or B].
Maintenance
Name
Lists the logical name of the maintenance object with the alarm.
On Brd A y (yes) indicates the fault was found on the associated circuit
pack. A n (no) indicates the fault is not connected to the circuit
pack.
display alarms
ALARM REPORT
Port Maintenance On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved
02A TONE-BD y MAJOR y n 05/22/20:34 00/00/00:00
01C07 ANL-BD y MINOR n n 05/22/20:26 00/00/00:00
01C0702 ANL-LINE n 311 WARNING IN 05/22/20:26 00/00/00:00
01C0701 ANL-LINE n 1051 WARNING IN 05/22/20:26 00/00/00:00
01C0703 ANL-LINE n 1053 WARNING IN 05/22/20:26 00/00/00:00
01C1505 CO-TRK n 78/01 WARNING OUT 05/22/20:26 00/00/00:00
01C1505 CO-TRK n 78/01 WARNING OUT 05/22/20:26 00/00/00:00
02A0201 TONE-PT n WARNING 05/22/20:34 00/00/00:00
02A TDM-CLK n WARNING 05/23/13:43 00/00/00:00
PN 02B TDM-BUS n WARNING 05/23/14:53 00/00/00:00
Command successfully completed