Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-790MAINT (EPN Maintenance Circuit Pack)
10
Table 10-264. TEST #306 EPN Maintenance CP Reset Test
Error
Code
Test
Result Description/Recommendation
1000 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1018 ABORT Test disabled via software patch.
2000 ABORT Response to the reset request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, look for and resolve all problems
associated with the Expansion Interface circuit pack (EXP-INTF).
2028 ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2030 ABORT EPN is down.
1. Run the Short Test Sequence against the Expansion Interface circuit
pack (test board PCSS) where PCSS is the 4-character address of
the active Expansion Interface circuit pack), and refer to the
maintenance procedures outlined for that circuit pack.
2031 ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2032 ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, replace the EPN Maintenance circuit
pack.
Continued on next page