Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-74display synchronization
8
display synchronization
This command calls up the synchronization form where the administered
synchronization stratum and reference sources are displayed. (No changes can
be made to the system synchronization with this command.)
Feature Interactions
■ A DS1 interface or a UDS1 board that has been selected as either a
primary or secondary synchronization source cannot be removed on the
DS1 circuit pack administration form or the regular circuit pack
administration form.
Output
The following example shows the output for the display synchronization
command.
1. Refer to the Report Scheduler and System Printer feature specification for more details.
Identification:
Depends on the hardware that is physically connected to the port:
If hardware is The field contains
station station extension
trunk trunk group and member number)
modem pool modem pool group number
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
synchron-
ization
print
schedule
Report sent to printer
Command is validated and then a
scheduling form displays to schedule
execution of the command. The
command is then placed in the
command queue and is executed at
the specified time. The information
displayed by the command is sent to
the system printer instead of the
screen.
1
Examples:
display synchronization
display synchronization print
display synchronization schedule
init
inads
craft
cust
rcust
bcms
browse
none See below