Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-73save announcements
A
If the previously entered hardware-group command used the "all-ports" option the
following message will be displayed:
Resume disallowed with ’all-ports’
option in original command
If the previously entered hardware-group command used the "SPE-interchange" option
the following message will be displayed:
Resume disallowed with ’SPE-interchange’
option in original command
save announcements
Help Messages
If the system technician presses HELP after entering "save announcements" on a simplex
SPE system the following message is displayed:
Entry is not required
If the system technician presses
HELP after entering "save announcements" on a duplex
SPE system the following message is displayed:
Enter [’spe-active’ or ’spe-standby’]
Error Messages
If the announcement data module cannot be accessed (upload/download port is active),
the following message is displayed:
Announcement data module not available
If the announcement data module is out of service, the following message is displayed:
Announcement data module out of service
If one or more of the announcement ports are in use, the following message is displayed:
Announcement port in use; please try later
If there are no announcements on the announcement board, the following message is
displayed:
No announcements on board
If the announcement data module is not administered, the following message is
displayed:
Required announcement data module not administered