Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-280status isdn-testcall
8
Output
The following example is a display of the status interface a1 command.
status isdn-testcall
The status isdn-testcall command displays the progress of an outgoing
ISDN-PRI test call. The status form displays the tested ISDN-PRI B-channel port
number, bit error rate, number of bits transmitted, block error rate, number of
blocks transmitted, start time, duration specified, duration of test call and reason
of termination.
Feature Interactions
If the bit error rate or block error rate is greater than zero, the ISDN-PRI trunk may
be in trouble. The statistical information displayed on the terminal may deactivate
the ISDN trunk. This is subjective because the ISDN trunk may be used for data
or voice. If the trunk is used for data and the rates are high, the trunk should be
deactivated. If the trunk is used for voice, the trunk may not be deactivated. Also,
high rates be at risk for some type of power hit.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
isdn-testcall
group
number
group
member
number
print
administered number associated
with each trunk group.
administered number identifying a
particular trunk within a trunk
group.
Report prints to SAT-linked printer.
Examples:
status isdn-testcall 80/1
status isdn-testcall 78/1 print
init
inads
craft
none see below
status interface a1
PROCESSOR INTERFACE STATUS
Base Level Occupancy(low): 10
Base Level Occupancy(high): 25
Primary Queue Audit Error: 4
Secondary Queue Audit Error: 10
Translation Audit Error: 12
Protocol Timer Audit Error: 0
Hardware Sanity Timeout: 1
Hardware Resource Error: 12
Hardware Overload Error: 8