Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-78set signaling-group
A
set signaling-group
Help Messages
If the system technician presses HELP after entering "set signaling-group," the following is
displayed:
Enter group identifier
Error Messages
If the specified group identifier is non numeric or out of range, the following message is
displayed:
Signaling group invalid
If the specified group identifier is not administered, the following message is displayed:
No signaling group assigned
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message is displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message is displayed:
All maintenance resources busy; try again later
set synchronization
Help Messages
If the system technician presses HELP after entering "set synchronization," the following
message will be displayed:
Enter DS1 board location or Tone-Clock location:
[(cabinet (1-3)]; carrier (A-E))
Error Messages
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict