Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-51display communication-interface
8
Field descriptions
When you enter the command: display cabinet 3 and the cabinet is a stack of
single-carrier-cabinets, the system displays a screen similar to the figure below.
The fields on the screen are the same as described above.
display communication-interface
The display communication-interface command must contain one of the three
qualifiers defined below:
Cabinet Administered cabinet number
Cabinet Layout Type of cabinet (five-carrier or single-carrier-stack)
Cabinet Type Type of port network (processor or expansion)
Number of Port
networks
Number of port networks (1 or 2)
Room Room where cabinet is located, if administered on the cabinet form.
Floor Floor where cabinet is located, if administered on the cabinet form.
Building Building where cabinet is located, if administered on the cabinet
form.
Carrier Letter identifying the carrier (A-E or X not applicable)
Carrier Type Port, processor, switch-node, fan, or not-used
Number Administered port network number
or
switch node number
display cabinet 3
CABINET
CABINET Description
Cabinet: 3
Cabinet Layout: single-carrier-stack
Cabinet Type: expansion-portnetwork
Number of Portnetworks: 1
Room: 30n46
Floor: first
Building: main
CARRIER Description
Carrier Carrier Type Number
D not-used PN 03
D not-used PN 03
B port PN 03
A expansion-control PN 03