Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-58release packet-control
A
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
release packet-control
Help Messages
If the system technician presses HELP after entering "release packet-control," the
following message is displayed:
Enter Packet Control location: [cabinet(1)];carrier(A-B)
Error Messages
If this command is entered for a packet-control that resides on the stand-by control
complex of a High or Critical Reliability System, the following message is displayed:
Command only applies to the active Packet Control
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message is displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
release pms-link
Help Messages
If you press HELP after entering "release pms-link" the following message displays:
Entry is not required