Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-389test spe-standby
8
Field descriptions
test spe-standby
This command allows the technician to perform hardware diagnostic tests on the
standby Switch Processing Element (SPE) in a duplex SPE system. This
command tests all MOs in the standby MO. The STBY-SPE MO itself does not
have any defined tests. Instead, tests are run on the following MOs when the test
spe-standby command is run.
Refer to these MOs for more details. This command is only for a High or Critical
Reliability systems.
Port Not applicable. Always blank.
Maintenance
Name
The name of maintenance object.
Alt. Name Alternate means of identifying the maintenance object. This field
contains the extension when the object is a data module.
Test No Test being executed
Result Test result: Pass, Abort, Fail, No Board, Disabled, Extra Bd.
Error Code Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
MEMORY DUPINT PROCR FL-DATA
SHDW-LNK DATA-BD PR-MAINT PI-BD
SHDW-CIR DATA-CHL 12V-PWR PI-PT
SPE_SELEC SW-CTL CARD-MEM PKT-CTRL