Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-640EXP-INTF (Expansion Interface Circuit Pack)
10
Figure 10-33. Expansion Interface Packet Interface Test—EPN to EPN
Table 10-216. TEST #589 Expansion Interface Packet Interface Test
Error
Code
Test
Result Description/ Recommendation
1005 ABORT This test does not apply to the current system configuration. Either the system
is not administered to have the Packet Bus activated, the
Maintenance-Related System Parameters form has the Packet Bus Enabled
field set to "n," or the system is administered to have the Packet Bus
activated, but there exist TN776 Expansion Interface circuit packs that
prevent this test from running. The TN776 Expansion Interface circuit packs
do not support Packet Bus capabilities.
1033 ABORT The test cannot run because either one or both of the Expansion Interface
circuit packs on this link are busied out or an Expansion Interface circuit pack
is not present on the opposite end of the fiber.
1. If Expansion Interface is busied out, issue the release board PCSS
command.
2. Examine the results of Tests #237 and #238.
Continued on next page
PKT-
CTRL
EXP-INTF
EXP-INTF
EXP-INTF
EXP-INTF
EXP-INTF
EXP-INTF
Packet Bus ( PPN )
Packet Bus ( PN X )
Packet Bus ( PN Y )
UNDER TEST