Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-97list configuration
8
list configuration
Hardware configuration reports list, for each circuit pack in the group specified,
the type, code, suffix, and vintage of the requested circuit packs as installed in
the switch, and all ports assigned to the circuit pack.
NOTE:
The list configuration software-version command is discussed
separately under its own heading.
Hardware Groups
Enter one of the following hardware groups:
1. Refer to the Report Scheduler and System Printer feature specification for more details.
Core Dump Time
The time of the core dump for SPE A and SPE B. If the system has
a simplex SPE, a timestamp for SPE A (or the active SPE) and non
duplicated SPE” are displayed for SPE B. If the core dump cannot
be accessed, can’t access displays for the corresponding
SPE. For example, in a High or Critical Reliability System where
SPE B is not refreshed, SPE B displays can’t access instead of
a timestamp. If the MSS device storing the core dump timestamp
is busy for any reason, device busy displays at the terminal.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list
configuration
hardware-
group
print
schedule
Enter a group listed in the
Hardware Groups section below.
Report sent to printer.
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
1
Examples:
list configuration carrier 2c
schedule
list configuration port-network 5
list configuration stations print
init
inads
craft
cust
rcust
none none
carriers all Displays all circuit packs administered and/or physically
inserted in the port, switch node, and control carriers on
the system.