Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-106list history
8
Feature Interactions
The translation log is written to the memory card as translation data when the
save translation command is executed. The translation data is time stamped
when saved. This time stamp is noted when translation is loaded from the
memory card and included in all recent change history reports.
When a user requests a recent change history report, there could be other users
concurrently issuing data commands and altering the contents of the transaction
log. Therefore, if the user pages the entire way through the report, the oldest
entries in the transaction log (maximum 250 commands) may have been
overwritten by data commands issued by these other users. Should this occur,
the final entries of the report show the data commands issued by the other users
since the recent change history report was originally requested.
Also, use of the set time command to alter the system clock could make it look
as if the recent change history report is not in true LIFO order.
Output
list history Page 1 SPE A
HISTORY
Date of Loaded Translation: 11:34am Mon Apr 20, 1992
Date Time Port Login Actn Object Qualifier
4/20 17:23 SYSAM-LCL init go tcm
4/20 11:34 SYSAM-LCL init cha trunk-group 100
4/20 11:25 SYSAM-LCL init add trunk-group 100
4/20 11:25 SYSAM-LCL init cha circuit-pack 9
4/20 11:25 SYSAM-LCL init add cabinet 9
4/18 17:59 SYSAM-LCL init clea mst
4/18 17:59 SYSAM-LCL init test board 2e01
4/18 17:58 SYSAM-LCL init clea mst
4/18 17:58 SYSAM-LCL init enab mst
4/18 17:58 SYSAM-LCL init cha mst
4/18 17:58 SYSAM-LCL init disa mst
4/18 17:57 SYSAM-LCL init test board 2e01
4/18 17:57 SYSAM-LCL init clea mst
4/18 17:57 SYSAM-LCL init test board 2e01
press CANCEL to quit -- press NEXT PAGE to continue