Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-95status mst
A
status mst
Help Messages
If you press HELP after entering "status mst", the following message displays:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
status packet-control
Help Messages
If the system technician presses HELP after entering "status packet-control", the following
message is displayed:
Enter Packet Control location:
[cabinet(1)];carrier(A-B)
Error Messages
If this command is entered for a packet-control that resides on the stand-by control
complex of a High or Critical Reliability System, the following message is displayed:
Command only applies to the active Packet Control
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message is displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit