Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-198resume hardware-group
8
Field descriptions
resume hardware-group
The resume hardware-group command resumes the previous test
hardware-group command its canceled position. Entering another test
hardware-group disables the resume hardware-group command.
A canceled test hardware-group command appears as “canceled” on the
status hardware-group screen. A resumed test hardware-group command
appears as “active” on the status hardware-group screen.
Feature Interactions
Cancel hardware-group
Cancelling a test hardware-group command deactivates the test command. The
status hardware-group screen displays the state as “canceled”.
When the resume hardware-group command is entered to resume a
previously-canceled test hardware-group command, the state of the test
command changes to ’active’ on the status hardware-group screen.
save announcements
This command copies announcement data from the announcement board to the
MSS. The Card-Mem stores announcements for the system. By default,
announcement data writes to the MSS device in a simplex processor (SPE)
system, or to both MSS devices in a High or Critical Reliability System. Also, the
save announcements command can write to the MSS device on either processor,
in a High or Critical Reliability System.
Processor
Displays the processor that houses the MSS device used to
copy announcement data.
Command Completion
Status
Specifies successful completion of the command.
Error Code
System-generated description of a command failure.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
resume
hardware-group
init
inads
none none