Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-64ANL-BD (Analog Line Circuit Pack)
10
ANL-BD (Analog Line Circuit Pack)
Refer to "XXX-BD (Common Port Circuit Pack)" Maintenance documentation for
circuit pack level errors. See also "ANL-LINE (8-Port Analog Line), ANL-NE-L
(8-Port Neon Analog Line)", and "ANL-16-L (16-Port Neon Analog Line)"
Maintenance documentation for related line information.
1. Where P is the port network number (1 for PPN and 2 or [G.1] 3 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the carrier
where the circuit pack is located (for example, 01, 02, ..., etc.).
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
Full Name of MO
ANL-BD MIN test board PCSS sh 8-Port Analog Line Circuit Pack
ANL-BD WRN test board PCSS sh 8-Port Analog Line Circuit Pack
ANL-BD MIN test board PCSS sh 8-Port Neon Analog Line Circuit Pack
ANL-BD WRN test board PCSS sh 8-Port Neon Analog Line Circuit Pack
ANL-BD MIN test board PCSS sh 16-Port Neon Analog Line Circuit Pack
ANL-BD WRN test board PCSS sh 16-Port Neon Analog Line Circuit Pack