Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-49cancel hardware-group
8
Permissions
The following logins may execute this command: inads, init.
Examples
cancel hardware-group
Description
A system technician, in the course of the execution of a "test hardware-group"
command may find the need to stop the testing either temporarily or
permanently. This can be accomplished by entering the "cancel
hardware-group" command on the SAT. This command may be restarted where it
left off with the "resume hardware-group" command or another "test
hardware-group" may be entered.
In addition to the "cancel hardware-group" command, the ’cancel’ key on the SAT
cancels a hardware-group command executing in the foreground.
The status of a canceled "test hardware-group" command will show up as
’canceled’ on the "status hardware-group" screen.
When a "test hardware-group" command is executing in the foreground with the
’continuously’ option and the ’cancel’ key on the SAT is pressed or the "cancel
hardware-group" command is entered, then the hardware-group command is
canceled and for security reasons, the SAT running the "test hardware-group"
command will be logged off. However, after logging back on the system, the user
still maintains the capability to restart the canceled "test hardware-group"
command with the "resume hardware-group" command.
Defaults
None.
Parameters
None.
Help Messages
If the system technician presses help after entering "cancel hardware-group" the
following message will be displayed:
Entry is not required