Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-184list disabled-mos
8
Parameters
Help Messages
If the system technician presses help after entering "list disabled-MOs" the
following message will be displayed:
[’print’ or ’schedule’]
Error Messages
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy, try again later
Output
print This will cause the report to be printed if a printer is linked to the SAT.
schedule When the "schedule" option is specified, the command is validated and
then a scheduling form is displayed to allow the technician to schedule
execution of the command. The command is then placed in the
command queue and is executed at the specified time. The information
displayed by the command is sent to the system printer instead of the
screen. Refer to the Report Scheduler and System Printer feature
specification [1] for more details.
Maintenance
Name
The type of maintenance object or group of maintenance objects that
have been disabled. "ALL" is also valid.
Location The physical location of the maintenance object that has been
disabled. This field displays blanks if all maintenance objects have
been disabled (disable all) or all MOs of a specific type have been
disabled (disable MO-all).
Status Whether the maintenance object or group of maintenance objects is
"Enabled" or "Disabled."