Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-80clear link
8
clear link
This command will clear a link by performing a reset.
Synopsis
clear link link-id
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
clear link 1
clear link 8
Description
The clear link command will clear the hardware error counters associated with
the ports on the Processor Interface circuit pack (displayed via the status link
command).
Defaults
None.
Parameters
Help Messages
If the system technician presses HELP after entering "clear link," the following
message will be displayed:
Enter 1 character link number
Error Messages
If the link identifier is not within the valid range, the following error message is
displayed:
Link out of range, please press HELP
link-id The link-id is a number associated with each link (1-8). The link number
is assigned via the communication-interface links form.