Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-202list mst
8
Detailed description of Messages**
Note that the X.25 messages discussed below really follow the BX.25 Message
Protocol.
** The R2 message set will be defined in the document,
OSS Interface
Requirement for the Definity Generic 2.2 ISDN-PRI/DCIU Message Sequence
Tracer
, COMPAS ID 7459DR.
The terminology Message[n] used below refers to the byte at offset n in the
message being displayed.
MST message types contain a version number. Whenever the structure of the
MST message changes, the version field in the MST buffer will be changed.
0xA0 X.25 Outgoing application data message
0xA1 X.25 Incoming application data message
0xA2 X.25 Application error message
0xB0 X.25 Outgoing session layer control message
0xB1 X.25 Incoming session layer control message
0xCF X.25 Message confirmation
0xD0 X.25 Outgoing processor channel control message
0xD1 X.25 Incoming processor channel control message
0xD2 X.25 Link control message
0xD3 X.25 Link status message
0xE2 X.25 Session Timer Expirations
0xF0 X.25 Error Message (Outgoing Message Lost)
0xF1 X.25 Unrecognized Messages
0xF2 X.25 Error Message (DIP ICOM Record Aborted) (R2 Only)
0xF9 Snapper instrumentation message
0xFA Snapper continuation message (for large msgs)
Table 8-2. Summary of MST Message Types — Continued
Message
Type
Encode Description
Continued on next page