Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-27busyout pms-link
8
Help Messages
If the system technician presses HELP after entering "busyout pms-link" the
following message will be displayed:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"busyout pms-link."
Port With this maintenance object the port field is left blank.
Maintenance Name The type of maintenance object that is being busied out (always
PMS-LINK).
Alt. Name Not applicable.
Result The result of the busyout -"PASS", "ABORT", "FAIL".
Error Code A system-generated number that tells why the busyout failed or
aborted. A detailed list of the codes can be in the
"Busyout/Release Error Codes" section of this chapter.
busyout pms-link SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PMS-LINK PASS
Command Successfully Completed