Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-462status interface
8
If the specified carrier/position processor interface circuit pack is not inserted,
but the specified carrier is active, the following error message will be displayed:
Processor Interface (TN765) not
started or is being started
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
Base Level Occupancy (Low)
Base Level Occupancy (High)
Primary Queue Audit Error
Secondary Queue Audit Error
Translation Audit Error
Protocol Timer Audit Error
Hardware Sanity Timeout
Hardware Resource Error
Hardware Overload Error
The following is an example of the fields contained on the output form.
status interface a1
PROCESSOR INTERFACE STATUS
Base Level Occupancy(low): 10
Base Level Occupancy(high): 25
Primary Queue Audit Error: 4
Secondary Queue Audit Error: 10
Translation Audit Error: 12
Protocol Timer Audit Error: 0
Hardware Sanity Timeout: 1
Hardware Resource Error: 12
Hardware Overload Error: 8