Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-19busyout mis
8
Examples
busyout mis
Description
The busyout mis command will put a management information system in the
maintenance busy state. There will be no periodic or scheduled maintenance
performed on the busied out mis until it is released. When the object is busied
out no call processing activity may be performed over the link. A warning alarm is
generated (error type 18) on the mis that has been busied out, so that INADS can
access the state of it. The release mis command will return the busied out mis to
operation.
Defaults
None.
Parameters
None.
Help Messages
If the system technician presses HELP after entering "busyout mis" the following
message will be displayed:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message is displayed showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later