Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-559test cdr-link
8
Feature Interactions
The "test card-mem long" command will invoke the Memory Card
Erase/Write/Read Test. This means that the "save translation" and "save
announcement" commands will be rejected while a write-to-memory-card
operation is active.
The "test card-mem long" command will also invoke the Memory Card Capacity
Test which will check if the memory card is more than 98% full or not. This test
will also be invoked after a "save translation" command.
In a High or Critical Reliability System, running "test card-mem" command for a
memory card in the standby SPE means that the standby SPE is put into the
maintenance mode and no SPE interchange is allowed through the "reset system
interchange" command or scheduled SPE interchange.
test cdr-link
This command will perform a set of tests on a call detail recording (cdr)-link.
Synopsis
test cdr-link [ primary | secondary ]
[ short | long ][ repeat number | clear ]
schedule
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
test cdr-link primary l
test cdr-link secondary sh r 2
test cdr-link primary
test cdr-link secondary
test cdr-link secondary c
test cdr-link primary schedule
Description
The test cdr-link command will validate that the call detail recording (cdr)-link has
been administered and exists in the PBX. Each individual test will exercise
diagnostics on the link and then return results of the test along with any possible
error codes.