Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-89disable mst
8
Entry out of range
If the connection number entered is not administered, the following message is
displayed:
Identifier not assigned
If the administered connection number entered is already disabled, the following
message is displayed:
Administered connection already disabled
If the software data cannot be sent to the SAT, the following message will be
displayed:
Error encountered, can’t complete request
If the command entered is in conflict with another currently executing command,
then a message is displayed showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
Output
After the user has entered the command and the command is successful, the
following message appears at the bottom of the screen:
Command successfully completed
Feature Interactions
None.
disable mst
This command will allow the user to disable the mst.
Synopsis
disable mst
Permissions
The following default logins may execute this command: inads, init.