Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-561test cdr-link
8
Link not administered or not enabled
If no tests can be found for the link, the following message will be displayed:
No tests for this MO
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
For the following example, the command entered was "test cdr-link primary".
Port Not applicable. Will always be blank.
Maintenance
Name
The type of MO being tested. If testing primary cdr-link the MO is
PRI-CDR, else if testing secondary cdr-link the MO is SEC-CDR.
Alt. Name Not applicable. Will always be blank.
Test No The actual test that is being executed.
Result The result of the individual test - "PASS", "ABORT", "FAIL", "DISABLED".
Error Code A system-generated number that tells why the test failed or aborted. A
detailed list of the codes according to "Test No." is provided for each MO.
test cdr-link primary short
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
PRI-CDR 215 PASS
Command Successfully Completed